Ericsson 2009 Campus Recruitment

· Global Service Delivery Centre China (GSDC China), with an assigned headcount of over 230 employees, operates as part of the GSD Asia Pacific region. Today the centre is organized into four competence areas (CA), in accordance with the globally adopted blueprint for GSDCs. GSDC China also hosts BETE China (Test Environment) and SCOC China (HW Service Delivery).

Competence Areas:
·CA Access Networks
·CA Core Networks
·CA Telecom Management Solutions

The objective of this competence-based organization is to give employees broader career opportunities. Multi-skilled employees we will ultimately lead to shorter lead time, decrease costs and increase quality of delivery.

The role of the GSDC China is to:

Primarily within APAC, and in accordance with assignments issued from GSD Delivery Management, provide cost efficient and high quality services through the deployment of competent staff to fulfil contracts sold to Ericsson customers by Market Units (MUs). We are also responsible to ensure that our staff are constantly seeking opportunities for add on sales and cost and process driven innovations.
In addition the GSDC China delivers services supporting:

·Preparation of SW for China market sales
·KAM required sales support
·TTM project fulfillment

Location: Chengdu
Opening vacancies:15 (Chengdu and Wuhan)
Additional Notice:
· Since location is not finally decided, we require candidates should be ready for located either ChengDu or Wuhan as based location.
· The final decision of the working location will be made after trainee program finish.
Responsibilities & Main Tasks:
· We are looking to recruit engineers work with Network rollout , mainly focus on Mobile telecom Network.
· You will represent Ericsson while working with our customers to provide systems integration/customer support services.
· This job requires extensive travel; up to 70% mainly in the China and APAC but also in the rest of the world, sometimes in short notice.

Required Skills:
· Minimum a Bachelor of Science certificate in Computer Area or equivalent.
· Excellent English skill both oral and writing ability is mandatory.
· Strong IT/IP knowledge is much more preferred. IT/IP certification or equivalent experience is what we focus on.
· Good communication skills with ability to work in multi-ethnical environment.
· Short and long term travel is needed.

Responsibilities & Main Tasks:
· The Project Administration Function is responsible for handling all administrative matters (excluding Human Resources) and communication (IS/IT) matters during project establishment, execution and conclusion phases.
· The responsibility mainly consists of planning, organizing, monitoring, maintaining and closing down of required services in the field of administration and IS/IT for the project, thereby facilitating the work for all project members to meet the project goals.
Other administration work for the whole project office
When it comes to administrative matters, the main activities of a Project Administration Function is covering but not limited to:
· Accommodation
· Transportation
· Office administration
· Travel Expenses

Qualifications & Requirements:
· Bachelors degree, preferably in a science, business, English or telecommunications discipline;
· Good communication skills in English and Madarin
· Good planning skills and well organized
· Good skills and knowledge in use of computer and MS office application SW
· Self-motivated, hardworking and learning fast.

Responsibilities & Main Tasks
· We are looking to recruit engineers work with WCDMA Radio Access technology... for customer Support / Supply and support of network rollout.
· You will represent Ericsson while working with our customers to provide systems integration/customer support services.
· You will work on developing and integration telecom services solution using Ericsson technology but also third party solutions.
· This job requires extensive travel; up to 60% mainly in the China and APAC but also in the rest of the world, sometimes on short notice.
· CSR handling according to global processes and procedures.
· Enrich KCS solution base.
· Knowledge Sharing within team openly with initiative by the method of technical discussion / workshop / CSR&TR review meeting / seminar / Site visit report/solution review / O&M manual, etc.

Qualifications & Requirements
· Minimum a Bachelor of Science certificate in Computer Area/Telecommunications or equivalent.
· Excellent English skill both oral and writing ability is mandatory.
· Good adaptability and quick learner of new technical knowledge is essential.
· Strong IT/IP knowledge is much more preferred.
· Good communication skills with ability to work in multi-ethnical environment.
· Short and long term travel is needed.

Responsibilities & Main Tasks
· The main responsibility as Radio NW Consultant is to complete services solution to meet customers business needs. It includes all Radio NW aspects from beginning to end, Radio NW Planning to Optimization in business models. Radio NW Consultants are also responsible for providing Business development and Sales Support within area of expertise.
Work tasks:
· Designing radio network for GSM, WCDMa, or TDSCDMA.
· Consultancy on radio network optimization and performance improvement.
· This job requires extensive travel; up to 75% mainly in the China and APAC but also in the rest of the world, sometimes on short notice.
Note: All activities need to be performed with close interaction with the customer.

Qualifications & Requirements
· Minimum a Bachelor of Science certificate in Computer Area/Telecommunications or equivalent.
· Excellent English skill both oral and writing ability is mandatory.
· Good adaptability and quick learner of new technical knowledge is essential.
· Strong IT/IP knowledge is much more preferred.
· Good communication skills with ability to work in multi-ethnical environment.
· Broad knowledge within the field of radio communication systems
· Willing to travel for short or long assignments

Ericsson China R&D Institute is responsible for product development covering all standards in radio network, core network and service network, the overall technology management, 3G technical trials, standardization and regulation, research activities, and patent licensing in Ericsson China.
We are an important R&D organization within Ericsson global R&D network, besides, we have a close cooperation with Ericsson China Market Unit and local customers.

An Ericsson design organization focused on developing of equipment within the radio network area of wireless systems. The main activity is Radio Base Station development. The organization handles today projects within the standards of TD-SCDMA, WCDMA and GSM.

The technology in the R&D Center covers both software and hardware. The software is mainly developed in C++ and Java, but also other IP related software technologies are within the scope. The latest DSP technology combined with other microprocessor systems are the target platforms for the software. The hardware development is performed within analogue electronics up to 2.5 GHz and high-speed digital electronics as well as power supply and mechanics. Design of circuit solutions, PCBs, FPGA and ASIC are within the scope. Configuration Management, R&D Sourcing and Component Engineering are other areas covered by the organization.

Responsibilities & Main Tasks
· To define verification environment and methodologies to be implemented within the R&D Center
· To implement the defined environment and methodologies
· To develop test cases for the specific products and projects
· To do the work of Integration and verification of products developed within the R&D Center

Qualifications
· Master degree or above in Electronics Engineering or Microwave
· Excellent knowledge of Wireless Communication systems, and UNIX operating system
· Experience in the field of RF performance measurement and the testing of TA and NAL or related
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· Radio design within the R&D Center projects. This could include work within analogue design, RF- design, PA-design and frequency generation design.
· Establishment and development of radio design environment within the R&D Center.

Qualifications & Requirements
· Master degree or above in Electronics Engineering or equivalent;
· Excellent knowledge of Wireless Communication systems;
· Excellent knowledge of different radio design areas mastering at least one of the areas analogue design, RF- design, PA-design and frequency generation design;
· Experience of technical work within wireless communication systems and radio design;
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· Digital design within the R&D Center projects. This could include circuit design, PCB design, FPGA design and ASIC design
· Establishment and development of digital design environment within the R&D Center.

Qualifications & Requirements
· Master Degree or above in Electronics Engineering or equivalent;
· Excellent knowledge of Wireless Communication systems;
· Excellent knowledge of different digital design areas mastering at least one of the areas circuit design, PCB design, FPGA design and ASIC design;
· Project experience on wireless communication systems and digital design preferable;
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· To suggest mechanical solutions for assigned projects
· To provide technical specification for outsourcing vendors.
· To cooperate with the R&D Center sourcing staff dealing external vendors in technical respects · To work with external vendors to complete mechanical assignments
· Establishment and development of design environment for mechanics within the R&D Center.

Qualifications & Requirements
· Master degree or above in Mechanical Engineering or equivalent;
· Very good knowledge of Wireless Communication systems;
· Research experience related to mechanical design;
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· To do the design of power supply within the R&D Center projects
· To establish and develop design environment for power supply within the R&D Center.
· To do specification work of power supply to be used by external vendors.
· To maintain close cooperation with the R&D Center sourcing staff when external vendors are used for the power supply.
· To work with external vendors within the power supply area

Qualifications & Requirements
· Master degree or above in Electronics or Power Engineering or equivalent;
· Knowledge of Wireless Communication systems;
· Experience of designing power supplies for electronic circuit boards;
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· To suggest thermal solutions for assigned projects
· To provide technical specification for outsourcing vendors.
· To cooperate with the R&D Center sourcing staff dealing external vendors in technical respects · To work with external vendors to complete thermal assignments
· Establishment and development of design environment within the R&D Center.

Qualifications & Requirements
· Master degree or above related to Thermal Engineering
· Research experience related to thermal design;
· Good communication skills and social abilities;
· Fluent in oral & written English.

Responsibilities & Main Tasks
· To define component related procedures and policies within the R&D Center.
· To evaluate and approve the component vendors to be used for the R&D Center projects together with the supply organization.
· To assure that all component documentation for the R&D Center products, required for purchase and production, are properly stored in PRIM and GASK in accordance with supply requirements.
· To assure that all necessary component documentation is properly stored in the design storage archives defined for each R&D Project.
· To support and engineering staff in component related matters.
· To create and maintain the necessary network of contacts within Ericsson to carry out the tasks.

Qualifications & Requirements
· Bachelor degree or above majoring in Electronic Engineering or Telecommunication;
· Good communication skills and social ability;
· Fluent in English speaking and writing.

Responsibilities & Main Tasks
· Maintaining/Updating the dedicated databases (including documentation, resources, training etc…) interfaces/cooperates with BU GS, BU SY, BU AC, CBC (Academy, Product & Systems department, PA, PD, FA, PM) and provides/supports Service Delivery Account Teams and Regions Service Delivery organization(s) with solutions in regards to their needs.
· Responsible for the management of NPI specific technical solutions and issues, develops and setup the documents criteria (known as NPI document) and cases being directives to the delivery organization (NRO, CS, N&TC) minimizing NPI Delivery risks and impacts for MU-China. 3),,Advises / develops / supports / controls special projects and particularly NPI Support Programs
· Develops, Updates, Customizes, Maintains the dedicated databases.
· Works in close cooperation with BU GS, BU SY, BU AC, CBC (Academy, Product & Systems department, PA, PD, FA, PM) supporting the Service Delivery Organization with NPI directives/hand-on technical documents describing criteria and cases, identifying and quantifying needed training and resources with an up-to-data time-planning of required training and resources added to a competence mapping & development.
· Provides / Supports Service Delivery Account Teams and Regional Service Delivery Organization with NPI solutions with regards to their needs related to the contractual obligations using the available products and solutions, controlling all activities related to development of solutions and implementation.
· Advises / Develops / Supports / Controls NPI overall technical updates and changes including activities, sequences, estimated durations and schedules related to the matters.
· Initiates / drives specific initiatives related to lower costs business operations.

Qualifications & Requirements
· Master degree or equivalent and Fluent in English, both writing and speaking
· Strong business mind and business oriented
· High Leadership and management skills
· Analytical skills, structured and logical thinking
· High team working skills
· Excellent interpersonal communication and networking skills

Responsibilities & Main Tasks:
· Integrate hardware and software of different nodes to implement mobile radio network and core network.
· Design and perform integration tests, debug node and system issues, verify compliance of interfaces and features.
· Work in cross-functional team environment with Systems Engineering and System Development and participate in design, implementation and test reviews.
· Drive quick resolution of the problems by coordinating the tests with H/W, S/W engineers and system design.
Required Skills:
· Bachelor of Science in Electrical Engineering or Computer Science required, MS preferred.
· Solid knowledge in Communications, Signaling Processing and Information Theory.
· Knowledge of mobile core and radio network architecture.
· Knowledge of mobile system technology and protocols in one or more of the following areas is required: GSM, WCDMA, CDMA2000, TD-SCDMA.
· Knowledge and experience in one or more of the following areas are preferred: ATM, SS7, TCP/IP, speech coding, channel coding.
· Experience with the following equipment is preferred: MGTS, Nethawk, TEMS, K1205, K1297, ADTECH, TD-SCDMA handsets.
· Strong troubleshooting and problem solving skills.
· Knowledge of Perl/TCL and scripting skills is preferred.
· Knowledge of basic UNIX operation is required.
· Strong verbal and written communication skills in English are required.
· Strong teamwork skills.

Responsibilities & Main Tasks
· Design and develop public safety software.
· Review and document software design.
· Perform unit, component and integration tests on software.
· Write implementation proposal, test plans, etc.
· Interface with systems engineers from other countries to understand the requirements.

Qualifications & Requirements
· BS in Computer Science or Telecom required, MS preferred.
· Good knowledge of .NET framework and C# programming (if No C#, at least excellent programming skills in C++.).
· Experienced on Windows Programming.
· Familiar with Microsoft SQL Server.
· Object Oriented Analysis and Design skills.
· Understanding of wireless data communications concepts and protocols.
· Strong software skills and demonstrated software debugging skills.
· Must be a team player and able to work in an extremely fast pace, high-pressure environment.
· Good communication skills and social abilities.
· Fluent in oral & written English.

Responsibilities & Main Tasks
· Independently design and develop network management products (OAM/NBI) for telecommunication network
· Work in cross-functional team environment with Systems Engineering and System Development and participate in design, implementation and test reviews
· Drive quick resolution of the problems by coordinating the tests with H/W, S/W engineers and system design

Qualifications & Requirements
· Master of Science in Electrical Engineering or Computer Science required
· Good understanding of telecommunication knowledge, such as GSM, TD-SCDMA, WCDMA.
· Experience in object oriented programming and system design, strong programming skills & experience in C++/JAVA or script
· Experience in OAM software development, knowledge of Network management protocols (SNMP, CORBA, CMIP, UDP, TCP/IP)
· Experience in database software development such as Oracle, Sybase and mySQL
· Strong analytical, troubleshooting and problem solving skills
· Good team player
· Strong verbal and written communication skills in English are required

Responsibilities & Main Tasks
· Fully responsible for R&D Test Environment setup and lab network maintenance.
· TE solution provisioning;
· Network planning;
· HW installation;
· SW configuration & upgrading;
· Network integration;
· System trouble shooting;
· Technical documentation updating;
· Responsible for lab routine work, such as lab process management, lab assets management, purchasing, and so on.

Qualifications & Requirements
· Good system knowledge of GSM, WCDMA, TD-SCDMA
· Good testing experience on Radio & Core network configuration/ upgrade/ integration/ trouble shooting
· Unix knowledge
· IP knowledgeOSS knowledge
· Bachelor degree or above on EE, CS and Telecommunication
· Good written and spoken English
· Be willing to cooperate and support others
· Be able to work under pressure
· Proactive, hard working, quick learner
· Good communication skill

China R&D Systems and Technology is further strengthening its capacity on IP
technologies. In the light of our full service broadband ambition and ongoing
deployments, we will intensify the cooperation with our customers. The optimal
architecture, products and features and their introduction shall be defined in a
close dialogue with the major players in China mainland.
To do so, we are looking for a strong candidate to enhance our team in Beijing.
Main focus are our IP backbone and broadband access products. The task will
also comprise contributions to Chinese and international standardization as well
as the solution for the evolved packet core for the future mobile networks.
The role resides in a triangle between our development units, the local market
unit and the Chinese decision making bodies. Systems support for customer
trials and demos also belong to our daily business.

Qualification
· Phd in Computer science, Telecommunication, Electrical Engineer or equivalent;
· Proven track record as System Architect in the Telecom industry;
· Good understanding of IMS and general Internet technology (e.g. SIP, Diameter, AAA) is a plus;
· Excellent interpersonal and communicative skills;
· Fond of working in a cross-functional environment;
· Fluent in verbal and written English;

Responsibilities & Main Tasks
· Carry out theoretical analysis and computer simulations
· Secure new ideas by actively working with patents in the projects
· Support the standardization work with technical contributions according to Ericsson's interest
· Transfer know-how and results achieved in the projects by writing reports, arranging and taking part in technical seminars, etc.
· Present prototypes, demos and papers as well as prepare and take part in meetings with customers in order to demonstrate Ericsson's technical image
· Co-operate with other departments/units in Ericsson China in some common technical areas
· Keep good contacts with universities and research institutes

Qualifications& Requirements
· Ph. D. degree in telecommunication or equivalent, or Master degree having at least 1-2 years' relative working experience, with emphasis on digital wireless communications
· Experienced in signal processing and/or wireless access networks (radio resource management, performance analysis)
· Good knowledge in OFDM, MIMO, etc.
· Skillful with Matlab, C/C++, Java
· Good communication skills and social ability
· Good team work spirit
· Ability to co-operate and work with people from different cultures
· Self-motivated, flexible and fluent in English both oral and written

Responsibilities & Main Tasks
· Ericsson TD-SCDMA RAN system management
· Support Market Unit China with TD-SCDMA RAN expertise
· Support TDSCDMA R&D center in the system management and system design
· Carry out theoretical analysis and computer simulations for TD-SCDMA
· Secure new ideas by actively working with patents in the projects
· Support the standardization work with technical contributions according to Ericsson's interest
· Transfer know-how and results achieved in the projects by writing reports, arranging and taking part in technical seminars, etc.

Qualifications & Requirements
· Master degree above in telecommunications or electrical engineering
· understanding in TDSCDMA RAN technology and products, including system design and system management, radio resource management, RAN optimization and performance tuning, operation and maintenance
· Broad knowledge of other wireless technology such as WCDMA, CDMA
· Enjoy working in a cross units team environment
· Strong baseband chip design and work experience in TD-SCDMA are highly desirable
· Skillful with C/C++, Matlab
· Good communication skills and social ability
· Good team work spirit
· Ability to co-operate and work with people from different cultures
· Self-motivated, flexible and fluent in English both oral and written

An Ericsson design organization focused on developing products for Broadband Access and Optical Transmission.
The technology in the R&D Center covers both software and hardware. The software is mainly developed in C and C++, typically running on Linux or SOS operating systems. The hardware development is mainly related to high-speed digital electronics as well as power supply and mechanics. Design of circuit solutions, PCBs and FPGA are within the scope. Product integration, verification and certification, Project Management, Supply Chain setup, Configuration Management and R&D Sourcing are other areas covered by the organization.

Responsibilities

· To carry out the assigned tasks and report progress to the R&D Head.
· Comply with and follow the directives, instructions and procedures implemented in the R&D Center.
· To support the R&D or HW manager in the task to ensure that the HW design activities fulfill the needs within the R&D Center in an efficient way.
· Recommend new technical solutions
· The tasks of the SW Engineer include participation in one or more of the following:
· Responsible to ensure quality of the deliverables (products, processes and services) from the job assigned covering system design to End-user documentation
· Participate in technical co-ordination teams, when applicable.
· Attend technical seminars.
· Participate in pre-studies, ensuring transfer of applicable knowledge.

QUALIFICATION

· Master degree in CS, EE, Telecom or equivalent
· Excellent knowledge of Communication systems and their design
· Understanding of the Telecom market and its players
· Good communication skills and social ability.
· Fluent in English speaking and writing, effective written and oral English communication skills.
· Well organized, flexible and professional.
· Excellent teamwork and cooperation spirit, both professional and personal integrity, proactive and positive learning attitude
· At least 1 year of relevant experience in a relevant technical areas; e.g. Transmission networks (SDH, Metro Ethernet MEF etc), Access technologies (xDSL, PON, CATV etc) or IP Access Aggregation (Ethernet Switching, Routing, QoS etc), with proven industry experience.
· Experience with SW development in these languages: C(Mandatory), C++, JAVA, Network Processors (Preferred)
· Experience with SW development in these environments: Linux (Mandatory), VxWorks (Optional)
· Experience with embedded HW design on these platforms: PPC(Prefered), MIPS, ARM
· Experience in at least one of the following areas: Routing, L2 & L3 Ethernet Switching, Network Management, SNMP, TCP/IP Protocol Stack, VoIP via SIP/H.248, xPON systems and technologies (Especially GPON), PWE3.

Responsibilities & Main Tasks

• To carry out the assigned tasks and report progress to the department Head.
• Comply with and follow the directives, instructions and procedures implemented in the R&D Centre.
• Responsible for Product Configuration Management within the assigned R&D Projects.
• Responsible for defining and maintaining Configuration Management procedures and policies within the R&D Center
• To support the R&D manager in ensuring that the product structures are according to Ericsson guidelines
• Responsible to ensure quality by following project checklists
• Follow up with design engineers to meet documentation quality in design structures.

Qualifications

• Bachelor of Science degree with minimum 3 years working experience in configuration management area or Master degree in CS, EE, Telecom or equivalent
• Excellent computer skills, familiar with configuration management tools.
• Well structured, well organized and have strong driving skills.
• Result-oriented and able to foster team spirit.
• Have a pro-active way of working.
• Keen to solve problems as they arise and do so creatively.
• Good communication and presentation skills.
• A co-operative approach and strong verbal and written communication skills in English are mandatory.

Responsibilities and main tasks

• To carry out the assigned tasks and report progress to the Project Office Manager and the General Manager
• Comply with and follow the directives, instructions and procedures implemented in the R&D Center .
• To Report Project Overview to General Manager & Project Office Manager
• Project Assignment and PO Management
• Project High level plan Administration
• Project Economy Report (Budget vs. Progress)
• Project Roadmap Administration (Key dates and Schedule)
• To Report Organization Overview to General Manager & Management Team
• CBC/XR Resource Planning Administration
• CBC/XR Progress vs. Targets Report (Balanced Score Card)
• CBC/XR Financial Follow-up (OPEX, UI etc)
• To Coordinate with Daily Operation
• To assist Project Manager with project financial control
• Interface with relevant financial controller organization (Ericsson China and Global)
• Ensure working comply with and follow directives, instructions and procedures in R&D Center
• Ensure CBC/XR comply to SOX related requirements
• Ensure CBC/XR process/procedures updated and corrected in Operation Binder

QUALIFICATION

• Master or Bachelor degree
• Good documentation knowledge
• Excellent communication skills and social abilities
• Focus on details and proven ability to always ensure correctness in reported data is a must
• Good co-ordination skills
• Effective written and oral English communication skills
• Strong ability to analyze and structure large amounts of information
• Able to identify, analyze and solve problems
Strong initiative and learning willingness
• Well organized, flexible and professional.
• Excellent teamwork and cooperation spirit, both professional and personal integrity, proactive and positive learning attitude
• Practical and creative
• Able to work independently
• Able to accept responsibility

Respondsibilities & Main Tasks

• Responsible for planning, prioritizing and executing projects
• Responsible for developing a project plan including a time schedule, project goals, objectives and budget plan
• Responsible for preparing project documents and reports
• Responsible for tracking and following up the time schedule, project goals, objectives and budget plan against the project plan
• Responsible of reporting progress and status as defined by the total project
• Responsible for making sure the project is completed on schedule, within budget, and with the right quality
• Responsible for evaluating the technical impact of changes in requirements and scope

Required Skills

• Masters degree, preferrably in Engineering, Business or related field
• Minimum 3 years of project managemet experience
• Knowledge of telecommunications systems and products
• Familiar with project management tools such as MS Project, MS Excel
• Excellent written and verbal communication skills
• Fluent in oral & written English

Responsibilities & Main Tasks
· To carry out the assigned tasks and report progress to the R&D Head and project manager.
· To support the R&D or HW manager in the task to ensure that the HW design activities fulfill the needs within the R&D Center in an efficient way.
· Initiate and decide how functions will be implemented, and perform solution analysis and evaluate alternative solutions.
· Board design and verification
· HDL code design and verification

Qualifications & Requirements
· Master degree in EE, communication and Information system, control system, etc.
· Strong knowledge of Communication systems, such as Transmission networks (SDH, Metro Ethernet MEF etc), Access technologies (xDSL, PON, CATV etc) or IP Access Aggregation (Ethernet Switching, Routing, QoS etc
· Strong knowledge on embedded system
· Capable of circuit design
· Strong HDL design ability.
· EMC knowledge is plus
· Good communication skills and social ability.
· Teamwork
· Quick to learn and adapt
· Creation
· Fluent English in speaking and writing

Responsibilities & Main Tasks
· To carry out the assigned tasks and report progress to the R&D Head and project manager.
· To support the R&D or HW manager in the task to ensure that the HW design activities fulfill the needs within the R&D Center in an efficient way.
· Come with inputs to overall system product design
· Provide cost-effective mechanical solutions
· Implementation mechanics design and solve mechanics design problems such as structure, tolerance, thermal, etc.

Qualifications & Requirements
· Master degree in mechanics engineering or equivalent
· Good knowledge on mechanics related standards and requirements
· Good knowledge on material selection and manufacture process
· Good knowledge on thermal design
· Experience in telecommunication equipment enclosure is a plus
· EMC knowledge is a plus
· Professional in CAD tool such as ProE
· Good communication skills and social ability.
· Teamwork
· Quick to learn and adapt
· Creation
· Fluent English in speaking and writing

Responsibilities & Main Tasks
· To carry out the assigned tasks and report progress to the R&D Head.
· To support the R&D or I&V manager in the task to ensure that the designed products fulfill the requirement in an efficient way.
· Responsible to ensure quality of the deliverables (products, processes and services) from the job assigned covering system design to End-user documentation
· Participate in technical co-ordination teams, when applicable.
· Attend technical seminars.
· Participate in pre-studies, ensuring transfer of applicable knowledge.

Qualifications & Requirements
· Master degree in CS, EE, Telecom or equivalent
· Excellent knowledge of Communication systems and their design
· Understanding of the Telecom market and its players
· Good communication skills and social ability.
· Fluent in English speaking and writing.
· Excellent teamwork and cooperation spirit, both professional and personal integrity, proactive and positive learning attitude
· Experience with at least one of the following areas:
　- xPON systems and other FTTx technologies (Especially GPON)
　- Transmission systems
　- Routing
　- L2 & L3 Ethernet Switching
　- Network Management
　- SNMP
　- TCP/IP Protocol Stack
　- VoIP via SIP (H.248)
　- xDSL systems and technologies
· Experience with SW or HW development is a plus:

Object of the job
To be responsible to ensure the optimal supply chain and most efficient product manufacture cost.Work scope is product oriented crossing commodity which covers electro-mechanics, electrical component, EMS VA, SW license, consultancy service.

Responsibilities and main tasks
· Responsible for supplier selection.
· Responsible for sourcing / supply chain strategy set-up.
· Responsible for NPI/TPI projects within R&D product scope globally.
· Responsible for commercial agreements availability.
· Drive and coordinate the annual negotiation.
· Drive supply chain optimization.
· Drive for continuous cost reduction.
· Responsible for supplier audits.
· Ensure Ericsson competitiveness by creating most efficient cost solution.
· Analysis cost structure to ensure lowest component cost.
· Monitor technology & commercial evolution in the industry

Qualifications & Requirements
· Bachelor degree or above of first level University (Engineering background is preferred)
· Business and management awareness
· Strong leadership and communication skill
· Comprehensive knowledge of technologies
· Well organized and have structure thinking
· Initiative and positive personal personality
· Fluent in English speaking and excellent in English writing
· Development potential
· Sourcing or supply experience is highly preferred
· Telecommunication background is highly preferred

Object of the job
To be responsible for industrialization of the products developed.Work scope is product oriented covering area of supply chain strategy, prototype delivery, production test development and supply coordination.

Responsibilities and main tasks
· Take charge of NPI project which is under main development project
· Manage internal and external resource to ensure on time and on cost delivery for project
· Manage NPI project budget, time schedule according to the requirement from main project
· Supervise the production test development to fulfill the requirement
· Drive supply chain set-up and maintenance
· Ensure product quality and supply chain security
· Control and improve production yield
· Ensure product orderability set-up
· Ensure smooth product hand over from NPI to mass production
· Maintain relationship with both internal and external counterpart

Qualifications & Requirements
· Bachelor degree or above of first level University (Engineering background is preferred)
· Business and management awareness
· Strong leadership and communication skill
· Comprehensive knowledge of technologies
· Well organized and have structure thinking
· Initiative and positive personal personality
· Fluent in English speaking and excellent in English writing
· Development potential
· Telecommunication background is highly preferred

Responsibilities & Main Tasks
· To carry out the assigned tasks and report progress to the department Head.
· Comply with and follow the directives, instructions and procedures implemented in the R&D Center.
· To support the R&D manager ensuring that the product designs fulfils the requirements and technology strategies
· Identify synergies with other projects or products in the China R&D port folio
· Recommend new technical solutions
· Responsible to ensure quality of the deliverables (products, processes and services) from the job assigned covering system design to End-user documentation
· Lead feasibility or quick study teams on new products, features or technologies
· Participate in technical co-ordination teams, when applicable.
· Attend technical seminars.
· Participate in pre-studies, ensuring transfer of applicable knowledge.

Qualifications
· Master degree in CS, EE, Telecom or equivalent
· Excellent knowledge of Communication systems and their design
· Understanding of the Telecom market and its players
· At least one non-pure-academic vertical task and have made major contribution.
· Well organized, flexible and professional.
· Effective written and oral English communication skills
· Excellent teamwork and cooperation spirit, both professional and personal integrity, proactive and positive learning attitude
· Experience in at least one of the following areas:
· IP Routing
· L2 & L3 Ethernet Switching
· xDSL systems and technologies
· xPON systems and technologies (Especially GPON)
· Transmission networks and technologies (SDH, PDH, Microwave, WDM or Carrier Ethernet)
· Pseudo Wire (PWE3) and Circuit Emulated Services (CES) over Packet or Ethernet (SAToP)
· Mechanical design in metal and plastic materials
· Thermo design technologies
· EMC & EMI design rules
· Network Management
· VoIP via SIP or H.248
· Web based user interface for residential equipment
· Embedded SW development
· Embedded HW design

China R&D Shanghai is research & development center in Shanghai. It is primarily responsible for developing and providing application software products in core network, IMS, packet core and service layer.

Core & IMS China R&D
Core & IMS China R&D, as part of China Technology and R&D, is a branch of DUCI in Shanghai. We are a development organization focused on developing products and nodes within the Core Network, Packet Core and IMS domains. The technology is software, mainly C++, JAVA and PLEX running on COTS and Ericsson HW platforms and infrastructure.

Core Network development cover
- CDMA MSC Node Responsibility
- Product responsibility TCS-M, COSS+
- Signaling design and feature test
- Software Assembly Support and Build & Replacement
- TD-SCDMA Core Network support in China R&D

IMS development cover
- MGC development
- WUIGM development
- IPWorks development
- MRFC development

PC Development cover
- CGSN, QuicLINK, IP-MUX and SGSN Pool Proxy development
- Packet Core trials and demos for local operators

Responsibilities & Main Tasks
· Work with leading edge technology design (design documentation, coding in C/C++ and/or Java), writing test specification, test software and function test for GSM/GPRS and WCDMA systems.
· Perform system design: analysis customer requirements and propose system implementation solutions; track requirements all the way till requirements are been fulfilled (when enough experience is gained).
· Handle Customer Adaptation or Product Maintenance work, performs trouble-shooting for whole product upon customer request.
· Design documentation like component description and use case modeling during system design and implementation.

Qualifications & Requirements
· University Bachelor or Master Degree in any of the following: Computer Science, Telecommunication, Information Technology or Electrical Engineering with more than one year experience in related field is required.
· Solid experience on C/C++ and /or Java and UML design more than one year.
· Experience on System design and/or BIG development project experience for more than two years is an advantage.
· Experience on Web service, XML, Corba is an advantage.
· Knowledge of the following: Video streaming, RTP, RTCP, RTSP, RFC and MPEG4 is an advantage.
· Multi-media messaging service knowledge: Instant Messaging, Multi Media Messaging is an advantage.
· Symbian platforms and J2ME experience is an advantage.
· Knowledge of Telecommunications (GSM/GPRS and WCDMA system) is an advantage.
· Knowledge of Solaris Platform and Operating system is an advantage.
· Basic knowledge of Software Engineering.
· Familiar with Rose Model, understand UML concept and RUP process.
· Knowledge of Object Oriented design (OOD).
· Can work independently, easy to work with and strong team work spirit.
· Good English communication skills (both in written and verbal), able to express own thinking clearly.
· Ability to learn new technology quickly and apply to work tasks.
· Innovative and solution thinking abilities.
· Open minded and willing to take any challenge.

Responsibilities & Main Tasks
· Ensuring the functionality and characteristics of a system on node level by performing both test design and test execution.
· Participate in product requirement analyzing and propose test strategy.
· Prepare test specification, execute test case, issue Trouble Reports and follow up Trouble Report status.
· Other activities related to testing, such as test tool design, process design etc.

Qualifications & requirements
· University Bachelor or Master Degree of any of the following: Computer Science, Telecommunication, Information Technology, Electrical Engineering with more than one year experience in related field is required.
· Highly developed knowledge in Integration & Verification Engineering.
· Good knowledge in Software Engineering.
· Good knowledge in Linux and Unix (Solaris).
· Good knowledge in GPRS and WCDMA systems.
· Good knowledge in GSN system architecture.
· Good knowledge in GPRS and WCDMA systems.
· Good knowledge in SS7 is an advantage.
· Good English communication skills (both in written and verbal), able to express own thinking clearly.
· Ability to learn new technology quickly and apply to work tasks.
· Innovative and solution thinking abilities.
· Open minded and willing to accept challenges.